PKm 60/65



The PEDROLLO PKm is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.

The pumps feature the following benefits;

  • Quiet operation due to the anti vibration system between shaft and impeller.
  • More compact.
  • More efficient motor with low energy consumption and lower operating temperature.
  • Special paint which gives improved resistance against environmental corrosion.
  • Extended life

Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.

MOTOR
Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.

Enclosure Class:PKm60®:IPX4, PKm65: IP44
Voltage:1x240V
Insulation Class:F
Speed:2900rpm

OPERATING CONDITIONS
Pumped Liquid: Thin, clean, chemically non aggressive liquids without abrasive particles or fibres.
Max. Fluid Temperature: +60°C
Max. Ambient Temperature: +40°C
Max. Suction Lift: 7m (at sea level)

PUMP DATA

Model Power (kW) Max Operating current (A) Dimensions (mm) Weight (kg)
DN1 DN2 L H H1 W
PKm60 0.37 2.4 1" 1" 208 145 56 118 5
Hydrofresh PKm60 535 500 346 255 14
PKm65 0.5 3.4 237 153 63 120 7

 

Choose Pump by Usage / Application

Find the BEST solution for your installation based on your select requirement.